- Home
- Equipment
Refine by
National Turbine Environmental Equipment & Supplies
5 equipment items found
Manufactured by:National Turbine Corporation based inSyracuse, NEW YORK (USA)
Number of Stages : 1 through 5. Inlet Connection : 2 7/8 Pipe, (optional) 2 1/2 NPT or 3" (76.2 mm) Flange, ASA 125# Drillinc. Outlet Connection : 2 7/8 Pipe, (optional) 2 1/2 NPT or 3" (76.2 mm) Flange, ASA 125# Drillinc. Operating Speed : 3550,7050 or 8180 RPM. Maximum Casing Pressure 15 PSIG (1.05 kg/cm2). Seals (air) : Labyrinth. Bearings : Ball, 10-Year Minimum Life Per AFBMA B-10 Standard ...
Manufactured by:National Turbine Corporation based inSyracuse, NEW YORK (USA)
Number of Stages : 1 through 10 Inlet Connection : 5” (127 mm) Flange, ASA 125# Drilling Outlet Connection : .5” (127 mm) Flange, ASA 125# Drilling Operating Speed : 3550 RPM Maximum Casing Pressure : 20 PSIG (1.41 kg/cm2) Seals (air) : Labyrinth Seals (gas) : Packing Gland (Special Seals Available) Bearings : Ball, 10-Year Minimum Life per AFBMA B-10 Standard (Made in U.S.A.) ...
Manufactured by:National Turbine Corporation based inSyracuse, NEW YORK (USA)
Filter Area: 74 Square Feet Filter Material: Singed Polyester - Other Materials Available Filter Design: Inverted Bag - Snap Bottom Shaker Mechanism: Manual Transverse - Standard Automatic Shaker - Optional Dust Bucket: 2.7 Cubic Foot "Feather-Lite" Corrosion-Proof, Molded High Density Polyurethane, Translucent To View Dirt Level. Steel 4.0 Cubic Foot Bucket - Optional Tank Construction: 12 Gauge ...
Manufactured by:National Turbine Corporation based inSyracuse, NEW YORK (USA)
We supply a wide range of parts to keep your vacuum system tank in top condition. Clean filter bags and air tight gaskets help assure peak performance from your vacuum ...
Manufactured by:National Turbine Corporation based inSyracuse, NEW YORK (USA)
Number of Stages : 1 through 6. Inlet Connection : 5" Tube or ANSI Flange. Outlet Connection : 5" ANSI Flange. Operating Speed : 3525 RPM. Maximum Casing Pressure : 15 PSIG. Bearings : Ball, self—aligning, flange mount, Life per ABMA B-10 standard Grease. Lubrication : Grease. Impeller Diameter : 19" (483mm). Impeller Tip Speed : 18,534 FPM (5344m/min). Drive : Direct coupled (belt drive ...